Linux version 2.4.21-0.13mdk (flepied@bi.mandrakesoft.com) (gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f7e0000 (usable) BIOS-e820: 000000000f7e0000 - 000000000f7e8000 (ACPI data) BIOS-e820: 000000000f7e8000 - 000000000f800000 (ACPI NVS) BIOS-e820: 000000000f800000 - 0000000010000000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 247MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 63456 zone(0): 4096 pages. zone(1): 59360 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=mdk ro root=306 quiet devfs=mount hdc=ide-scsi acpi=off ide_setup: hdc=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1333.199 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2660.76 BogoMIPS Memory: 247632k/253824k available (1410k kernel code, 5804k reserved, 1118k data, 136k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Mobile Intel(R) Celeron(TM) CPU 1333MHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1333.1626 MHz. ..... host bus clock speed is 133.3161 MHz. cpu: 0, clocks: 1333161, slice: 666580 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030122 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1d.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x0f (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0x98000000, mapped to 0xd0000000, size 8000k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: protected mode interface info at a5f3:1f5f vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture... no good signature found. Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 00:1f.6 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 00:1f.5 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 00:1f.1 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1d.0 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb060-0xb067, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb068-0xb06f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK2018GAP, ATA DISK drive blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff) hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 39070080 sectors (20004 MB), CHS=2432/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > p3 p3: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 83k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xaca0, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 IRQ routing conflict for 01:09.0, have irq 10, want irq 11 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xace0, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal Adding Swap: 530104k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: UJDA720 DVD/CDRW Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.1a [Flags: R/O MODULE]. NTFS volume version 3.1. MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 10 for device 01:05.0 IRQ routing conflict for 01:05.0, have irq 11, want irq 10 eth0: RealTek RTL8139 Fast Ethernet at 0xd08fb000, 00:00:e2:85:92:de, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139B' inserting floppy driver for 2.4.21-0.13mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: Each connection entry needs 116 bytes at least IPVS: ipvs loaded. eth0: Setting half-duplex based on auto-negotiated partner ability 0000. CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 Linux Kernel Card Services Kernel Version options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 01:09.0 PCI: Sharing IRQ 11 with 00:1d.1 IRQ routing conflict for 01:09.0, have irq 10, want irq 11 Yenta IRQ list 02b8, PCI irq10 Socket status: 30000411 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x38f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0100000-0xa01fffff Intel 810 + AC97 Audio, version 0.24, 15:29:58 Mar 14 2003 PCI: Found IRQ 10 for device 00:1f.5 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 00:1f.6 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH3 found at IO 0xa400 and 0xa000, MEM 0x0000 and 0x0000, IRQ 10 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: CRY52 (Cirrus Logic CS4299 rev D) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (1983 buckets, 15864 max) - 320 bytes per conntrack eth0: Promiscuous mode enabled. device eth0 entered promiscuous mode eth0: Promiscuous mode enabled. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected an Intel(R) 830M Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0x98000000 parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling).