Mar 21 13:38:10 pr Linux version 2.6.4-rc2-love1 (root@pr) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #4 Sun Mar 14 23:39:46 CET 2004
Mar 21 13:38:10 pr BIOS-provided physical RAM map:
Mar 21 13:38:10 pr BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 21 13:38:10 pr BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 21 13:38:10 pr BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 21 13:38:10 pr BIOS-e820: 0000000000100000 - 000000000f7e0000 (usable)
Mar 21 13:38:10 pr BIOS-e820: 000000000f7e0000 - 000000000f7e8000 (ACPI data)
Mar 21 13:38:10 pr BIOS-e820: 000000000f7e8000 - 000000000f800000 (ACPI NVS)
Mar 21 13:38:10 pr BIOS-e820: 000000000f800000 - 0000000010000000 (reserved)
Mar 21 13:38:10 pr BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 21 13:38:10 pr 247MB LOWMEM available.
Mar 21 13:38:10 pr zapping low mappings.
Mar 21 13:38:10 pr On node 0 totalpages: 63456
Mar 21 13:38:10 pr DMA zone: 4096 pages, LIFO batch:1
Mar 21 13:38:10 pr Normal zone: 59360 pages, LIFO batch:14
Mar 21 13:38:10 pr HighMem zone: 0 pages, LIFO batch:1
Mar 21 13:38:10 pr DMI 2.3 present.
Mar 21 13:38:10 pr Built 1 zonelists
Mar 21 13:38:10 pr Initializing CPU#0
Mar 21 13:38:10 pr Kernel command line: root=/dev/hda5 acpi=off gentoo=nodevfs selinux=0
Mar 21 13:38:10 pr CPU 0 irqstacks, hard=c05f0000 soft=c05ef000
Mar 21 13:38:10 pr PID hash table entries: 1024 (order 10: 8192 bytes)
Mar 21 13:38:10 pr Detected 1333.516 MHz processor.
Mar 21 13:38:10 pr Using tsc for high-res timesource
Mar 21 13:38:10 pr Console: colour VGA+ 80x25
Mar 21 13:38:10 pr Memory: 245252k/253824k available (3688k kernel code, 7836k reserved, 1162k data, 164k init, 0k highmem)
Mar 21 13:38:10 pr Calibrating delay loop... 2637.82 BogoMIPS
Mar 21 13:38:10 pr Security Scaffold v1.0.0 initialized
Mar 21 13:38:10 pr SELinux:  Disabled at boot.
Mar 21 13:38:10 pr Capability LSM initialized
Mar 21 13:38:10 pr Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 21 13:38:10 pr Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 21 13:38:10 pr Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 21 13:38:10 pr CPU:     After generic identify, caps: 0383f9ff 00000000 00000000 00000000
Mar 21 13:38:10 pr CPU:     After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
Mar 21 13:38:10 pr CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 21 13:38:10 pr CPU: L2 cache: 256K
Mar 21 13:38:10 pr CPU:     After all inits, caps: 0383f9ff 00000000 00000000 00000040
Mar 21 13:38:10 pr Intel machine check architecture supported.
Mar 21 13:38:10 pr Intel machine check reporting enabled on CPU#0.
Mar 21 13:38:10 pr CPU: Intel Mobile Intel(R) Celeron(TM) CPU         1333MHz stepping 04
Mar 21 13:38:10 pr Enabling fast FPU save and restore... done.
Mar 21 13:38:10 pr Enabling unmasked SIMD FPU exception support... done.
Mar 21 13:38:10 pr Checking 'hlt' instruction... OK.
Mar 21 13:38:10 pr POSIX conformance testing by UNIFIX
Mar 21 13:38:10 pr NET: Registered protocol family 16
Mar 21 13:38:10 pr PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
Mar 21 13:38:10 pr PCI: Using configuration type 1
Mar 21 13:38:10 pr mtrr: v2.0 (20020519)
Mar 21 13:38:10 pr ACPI: Subsystem revision 20040220
Mar 21 13:38:10 pr ACPI: Interpreter disabled.
Mar 21 13:38:10 pr Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 21 13:38:10 pr SCSI subsystem initialized
Mar 21 13:38:10 pr drivers/usb/core/usb.c: registered new driver usbfs
Mar 21 13:38:10 pr drivers/usb/core/usb.c: registered new driver hub
Mar 21 13:38:10 pr ACPI: ACPI tables contain no PCI IRQ routing entries
Mar 21 13:38:10 pr PCI: Invalid ACPI-PCI IRQ routing table
Mar 21 13:38:10 pr PCI: Probing PCI hardware
Mar 21 13:38:10 pr PCI: Probing PCI hardware (bus 00)
Mar 21 13:38:10 pr Transparent bridge - 0000:00:1e.0
Mar 21 13:38:10 pr PCI: Using IRQ router PIIX/ICH [8086/248c] at 0000:00:1f.0
Mar 21 13:38:10 pr PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
Mar 21 13:38:10 pr PCI: Found IRQ 11 for device 0000:00:1f.1
Mar 21 13:38:10 pr PCI: Sharing IRQ 11 with 0000:00:02.0
Mar 21 13:38:10 pr PCI: Sharing IRQ 11 with 0000:00:1d.0
Mar 21 13:38:10 pr ikconfig 0.7 with /proc/config*
Mar 21 13:38:10 pr VFS: Disk quotas dquot_6.5.1
Mar 21 13:38:10 pr Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 21 13:38:10 pr NTFS driver 2.1.6 [Flags: R/O].
Mar 21 13:38:10 pr udf: registering filesystem
Mar 21 13:38:10 pr Supermount version 2.0.4 for kernel 2.6
Mar 21 13:38:10 pr Initializing Cryptographic API
Mar 21 13:38:10 pr lp: driver loaded but no devices found
Mar 21 13:38:10 pr Linux agpgart interface v0.100 (c) Dave Jones
Mar 21 13:38:10 pr agpgart: Detected an Intel 830M Chipset.
Mar 21 13:38:10 pr agpgart: Maximum main memory to use for agp memory: 196M
Mar 21 13:38:10 pr agpgart: Detected 8060K stolen memory.
Mar 21 13:38:10 pr agpgart: AGP aperture is 128M @ 0x98000000
Mar 21 13:38:10 pr [drm] Initialized i830 1.3.2 20021108 on minor 0: Intel i830M GMCH
Mar 21 13:38:10 pr [drm] Initialized i830 1.3.2 20021108 on minor 1: Intel i830M GMCH
Mar 21 13:38:10 pr Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Mar 21 13:38:10 pr ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 21 13:38:10 pr PCI: Found IRQ 10 for device 0000:00:1f.6
Mar 21 13:38:10 pr PCI: Sharing IRQ 10 with 0000:00:1f.3
Mar 21 13:38:10 pr PCI: Sharing IRQ 10 with 0000:00:1f.5
Mar 21 13:38:10 pr parport0: PC-style at 0x378 [PCSPP(,...)]
Mar 21 13:38:10 pr lp0: using parport0 (polling).
Mar 21 13:38:10 pr Using cfq io scheduler
Mar 21 13:38:10 pr Floppy drive(s): fd0 is 1.44M
Mar 21 13:38:10 pr FDC 0 is a post-1991 82077
Mar 21 13:38:10 pr PPP generic driver version 2.4.2
Mar 21 13:38:10 pr PPP Deflate Compression module registered
Mar 21 13:38:10 pr PPP BSD Compression module registered
Mar 21 13:38:10 pr 8139too Fast Ethernet driver 0.9.27
Mar 21 13:38:10 pr PCI: IRQ 11 for device 0000:01:05.0 doesn't match PIRQ mask - try pci=usepirqmask
Mar 21 13:38:10 pr PCI: Found IRQ 10 for device 0000:01:05.0
Mar 21 13:38:10 pr IRQ routing conflict for 0000:01:05.0, have irq 11, want irq 10
Mar 21 13:38:10 pr eth0: RealTek RTL8139 at 0xd0093000, 00:00:e2:85:92:de, IRQ 11
Mar 21 13:38:10 pr eth0:  Identified 8139 chip type 'RTL-8100'
Mar 21 13:38:10 pr Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 21 13:38:10 pr ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 21 13:38:10 pr ICH3M: IDE controller at PCI slot 0000:00:1f.1
Mar 21 13:38:10 pr PCI: Found IRQ 11 for device 0000:00:1f.1
Mar 21 13:38:10 pr PCI: Sharing IRQ 11 with 0000:00:02.0
Mar 21 13:38:10 pr PCI: Sharing IRQ 11 with 0000:00:1d.0
Mar 21 13:38:10 pr ICH3M: chipset revision 2
Mar 21 13:38:10 pr ICH3M: not 100% native mode: will probe irqs later
Mar 21 13:38:10 pr ide0: BM-DMA at 0xb060-0xb067, BIOS settings: hda:DMA, hdb:pio
Mar 21 13:38:10 pr ide1: BM-DMA at 0xb068-0xb06f, BIOS settings: hdc:DMA, hdd:pio
Mar 21 13:38:10 pr hda: TOSHIBA MK2018GAP, ATA DISK drive
Mar 21 13:38:10 pr ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 21 13:38:10 pr hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive
Mar 21 13:38:10 pr ide1 at 0x170-0x177,0x376 on irq 15
Mar 21 13:38:10 pr hda: max request size: 128KiB
Mar 21 13:38:10 pr hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
Mar 21 13:38:10 pr hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda3 hda4
Mar 21 13:38:10 pr hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Mar 21 13:38:10 pr Uniform CD-ROM driver Revision: 3.20
Mar 21 13:38:10 pr libata version 1.01 loaded.
Mar 21 13:38:10 pr ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
Mar 21 13:38:10 pr USB Universal Host Controller Interface driver v2.2
Mar 21 13:38:10 pr PCI: Found IRQ 11 for device 0000:00:1d.0
Mar 21 13:38:10 pr PCI: Sharing IRQ 11 with 0000:00:02.0
Mar 21 13:38:10 pr PCI: Sharing IRQ 11 with 0000:00:1f.1
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
Mar 21 13:38:10 pr PCI: Setting latency timer of device 0000:00:1d.0 to 64
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.0: irq 11, io base 0000aca0
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.0: detected 2 ports
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.0: root hub device address 1
Mar 21 13:38:10 pr usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
Mar 21 13:38:10 pr drivers/usb/core/message.c: USB device number 1 default language ID 0x409
Mar 21 13:38:10 pr usb usb1: Product: Intel Corp. 82801CA/CAM USB (Hub #1)
Mar 21 13:38:10 pr usb usb1: Manufacturer: Linux 2.6.4-rc2-love1 uhci_hcd
Mar 21 13:38:10 pr usb usb1: SerialNumber: 0000:00:1d.0
Mar 21 13:38:10 pr drivers/usb/core/usb.c: usb_hotplug
Mar 21 13:38:10 pr usb usb1: registering 1-0:1.0 (config #1, interface 0)
Mar 21 13:38:10 pr drivers/usb/core/usb.c: usb_hotplug
Mar 21 13:38:10 pr hub 1-0:1.0: usb_probe_interface
Mar 21 13:38:10 pr hub 1-0:1.0: usb_probe_interface - got id
Mar 21 13:38:10 pr hub 1-0:1.0: USB hub found
Mar 21 13:38:10 pr hub 1-0:1.0: 2 ports detected
Mar 21 13:38:10 pr hub 1-0:1.0: standalone hub
Mar 21 13:38:10 pr hub 1-0:1.0: unknown reserved power switching mode
Mar 21 13:38:10 pr hub 1-0:1.0: individual port over-current protection
Mar 21 13:38:10 pr hub 1-0:1.0: Port indicators are not supported
Mar 21 13:38:10 pr hub 1-0:1.0: power on to power good time: 2ms
Mar 21 13:38:10 pr hub 1-0:1.0: hub controller current requirement: 0mA
Mar 21 13:38:10 pr hub 1-0:1.0: local power source is good
Mar 21 13:38:10 pr hub 1-0:1.0: no over-current condition exists
Mar 21 13:38:10 pr hub 1-0:1.0: enabling power on all ports
Mar 21 13:38:10 pr PCI: Found IRQ 11 for device 0000:00:1d.1
Mar 21 13:38:10 pr IRQ routing conflict for 0000:01:09.0, have irq 10, want irq 11
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.1: Intel Corp. 82801CA/CAM USB (Hub #2)
Mar 21 13:38:10 pr PCI: Setting latency timer of device 0000:00:1d.1 to 64
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.1: irq 11, io base 0000ace0
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.1: detected 2 ports
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.1: root hub device address 1
Mar 21 13:38:10 pr usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
Mar 21 13:38:10 pr drivers/usb/core/message.c: USB device number 1 default language ID 0x409
Mar 21 13:38:10 pr usb usb2: Product: Intel Corp. 82801CA/CAM USB (Hub #2)
Mar 21 13:38:10 pr usb usb2: Manufacturer: Linux 2.6.4-rc2-love1 uhci_hcd
Mar 21 13:38:10 pr usb usb2: SerialNumber: 0000:00:1d.1
Mar 21 13:38:10 pr drivers/usb/core/usb.c: usb_hotplug
Mar 21 13:38:10 pr usb usb2: registering 2-0:1.0 (config #1, interface 0)
Mar 21 13:38:10 pr drivers/usb/core/usb.c: usb_hotplug
Mar 21 13:38:10 pr hub 2-0:1.0: usb_probe_interface
Mar 21 13:38:10 pr hub 2-0:1.0: usb_probe_interface - got id
Mar 21 13:38:10 pr hub 2-0:1.0: USB hub found
Mar 21 13:38:10 pr hub 2-0:1.0: 2 ports detected
Mar 21 13:38:10 pr hub 2-0:1.0: standalone hub
Mar 21 13:38:10 pr hub 2-0:1.0: unknown reserved power switching mode
Mar 21 13:38:10 pr hub 2-0:1.0: individual port over-current protection
Mar 21 13:38:10 pr hub 2-0:1.0: Port indicators are not supported
Mar 21 13:38:10 pr hub 2-0:1.0: power on to power good time: 2ms
Mar 21 13:38:10 pr hub 2-0:1.0: hub controller current requirement: 0mA
Mar 21 13:38:10 pr hub 2-0:1.0: local power source is good
Mar 21 13:38:10 pr hub 2-0:1.0: no over-current condition exists
Mar 21 13:38:10 pr hub 2-0:1.0: enabling power on all ports
Mar 21 13:38:10 pr drivers/usb/core/usb.c: registered new driver usblp
Mar 21 13:38:10 pr drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Mar 21 13:38:10 pr Initializing USB Mass Storage driver...
Mar 21 13:38:10 pr drivers/usb/core/usb.c: registered new driver usb-storage
Mar 21 13:38:10 pr USB Mass Storage support registered.
Mar 21 13:38:10 pr drivers/usb/core/usb.c: registered new driver hid
Mar 21 13:38:10 pr drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Mar 21 13:38:10 pr mice: PS/2 mouse device common for all mice
Mar 21 13:38:10 pr i8042.c: Detected active multiplexing controller, rev 1.1.
Mar 21 13:38:10 pr serio: i8042 AUX0 port at 0x60,0x64 irq 12
Mar 21 13:38:10 pr serio: i8042 AUX1 port at 0x60,0x64 irq 12
Mar 21 13:38:10 pr serio: i8042 AUX2 port at 0x60,0x64 irq 12
Mar 21 13:38:10 pr serio: i8042 AUX3 port at 0x60,0x64 irq 12
Mar 21 13:38:10 pr Synaptics Touchpad, model: 1
Mar 21 13:38:10 pr Firmware: 4.6
Mar 21 13:38:10 pr 180 degree mounted touchpad
Mar 21 13:38:10 pr Sensor: 18
Mar 21 13:38:10 pr new absolute packet format
Mar 21 13:38:10 pr Touchpad has extended capability bits
Mar 21 13:38:10 pr -> four buttons
Mar 21 13:38:10 pr -> multifinger detection
Mar 21 13:38:10 pr -> palm detection
Mar 21 13:38:10 pr input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Mar 21 13:38:10 pr serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 21 13:38:10 pr input: AT Translated Set 2 keyboard on isa0060/serio0
Mar 21 13:38:10 pr Intel 810 + AC97 Audio, version 0.24, 14:23:04 Mar 11 2004
Mar 21 13:38:10 pr PCI: Found IRQ 10 for device 0000:00:1f.5
Mar 21 13:38:10 pr PCI: Sharing IRQ 10 with 0000:00:1f.3
Mar 21 13:38:10 pr PCI: Sharing IRQ 10 with 0000:00:1f.6
Mar 21 13:38:10 pr PCI: Setting latency timer of device 0000:00:1f.5 to 64
Mar 21 13:38:10 pr i810: Intel ICH3 found at IO 0xa400 and 0xa000, MEM 0x0000 and 0x0000, IRQ 10
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.0: port 1 portsc 0093
Mar 21 13:38:10 pr hub 1-0:1.0: port 1, status 101, change 1, 12 Mb/s
Mar 21 13:38:10 pr hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101
Mar 21 13:38:10 pr usb 1-1: new full speed USB device using address 2
Mar 21 13:38:10 pr usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
Mar 21 13:38:10 pr drivers/usb/core/usb.c: usb_hotplug
Mar 21 13:38:10 pr usb 1-1: registering 1-1:1.0 (config #1, interface 0)
Mar 21 13:38:10 pr drivers/usb/core/usb.c: usb_hotplug
Mar 21 13:38:10 pr i810_audio: Audio Controller supports 6 channels.
Mar 21 13:38:10 pr i810_audio: Defaulting to base 2 channel mode.
Mar 21 13:38:10 pr i810_audio: Resetting connection 0
Mar 21 13:38:10 pr ac97_codec: AC97 Audio codec, id: CRY52 (Cirrus Logic CS4299 rev D)
Mar 21 13:38:10 pr i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Mar 21 13:38:10 pr i810_audio: setting clocking to 48566
Mar 21 13:38:10 pr Advanced Linux Sound Architecture Driver Version 1.0.3 (Mon Mar 01 10:12:14 2004 UTC).
Mar 21 13:38:10 pr ALSA device list:
Mar 21 13:38:10 pr No soundcards found.
Mar 21 13:38:10 pr oprofile: using timer interrupt.
Mar 21 13:38:10 pr NET: Registered protocol family 2
Mar 21 13:38:10 pr IP: routing cache hash table of 2048 buckets, 16Kbytes
Mar 21 13:38:10 pr TCP: Hash tables configured (established 16384 bind 32768)
Mar 21 13:38:10 pr IPv4 over IPv4 tunneling driver
Mar 21 13:38:10 pr ip_conntrack version 2.1 (1983 buckets, 15864 max) - 296 bytes per conntrack
Mar 21 13:38:10 pr ip_tables: (C) 2000-2002 Netfilter core team
Mar 21 13:38:10 pr ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
Mar 21 13:38:10 pr arp_tables: (C) 2002 David S. Miller
Mar 21 13:38:10 pr NET: Registered protocol family 1
Mar 21 13:38:10 pr NET: Registered protocol family 10
Mar 21 13:38:10 pr IPv6 over IPv4 tunneling driver
Mar 21 13:38:10 pr NET: Registered protocol family 17
Mar 21 13:38:10 pr PM: Reading pmdisk image.
Mar 21 13:38:10 pr PM: Resume from disk failed.
Mar 21 13:38:10 pr found reiserfs format "3.6" with standard journal
Mar 21 13:38:10 pr Reiserfs journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Mar 21 13:38:10 pr reiserfs: checking transaction log (hda5) for (hda5)
Mar 21 13:38:10 pr Using r5 hash to sort names
Mar 21 13:38:10 pr VFS: Mounted root (reiserfs filesystem) readonly.
Mar 21 13:38:10 pr Freeing unused kernel memory: 164k freed
Mar 21 13:38:10 pr uhci_hcd 0000:00:1d.1: suspend_hc
Mar 21 13:38:10 pr Adding 522072k swap on /dev/hda6.  Priority:-1 extents:1
Mar 21 13:38:10 pr drivers/usb/core/usb.c: registered new driver usbserial
Mar 21 13:38:10 pr drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Mar 21 13:38:10 pr drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
Mar 21 13:38:10 pr pl2303 1-1:1.0: usb_probe_interface
Mar 21 13:38:10 pr pl2303 1-1:1.0: usb_probe_interface - got id
Mar 21 13:38:10 pr pl2303 1-1:1.0: PL-2303 converter detected
Mar 21 13:38:10 pr usb 1-1: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Mar 21 13:38:10 pr drivers/usb/core/usb.c: registered new driver pl2303
Mar 21 13:38:10 pr drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10
Mar 21 13:38:10 pr apm: BIOS version 1.2 Flags 0x0f (Driver version 1.16ac)
Mar 21 13:38:10 pr found reiserfs format "3.6" with standard journal
Mar 21 13:38:10 pr Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Mar 21 13:38:10 pr reiserfs: checking transaction log (hda1) for (hda1)
Mar 21 13:38:10 pr Using r5 hash to sort names
Mar 21 13:38:10 pr found reiserfs format "3.6" with standard journal
Mar 21 13:38:10 pr Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Mar 21 13:38:10 pr reiserfs: checking transaction log (hda7) for (hda7)
Mar 21 13:38:10 pr Using r5 hash to sort names
Mar 21 13:38:10 pr found reiserfs format "3.6" with standard journal
Mar 21 13:38:10 pr Reiserfs journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Mar 21 13:38:10 pr reiserfs: checking transaction log (hda8) for (hda8)
Mar 21 13:38:10 pr Using r5 hash to sort names
Mar 21 13:38:10 pr found reiserfs format "3.6" with standard journal
Mar 21 13:38:10 pr Reiserfs journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Mar 21 13:38:10 pr reiserfs: checking transaction log (hda9) for (hda9)
Mar 21 13:38:10 pr Using r5 hash to sort names
Mar 21 13:38:10 pr Disabled Privacy Extensions on device c0567920(lo)
Mar 21 13:38:11 pr ntpd[5394]: ntpd 4.2.0@1.1161-r Fri Mar  5 13:15:00 CET 2004 (1)
Mar 21 13:38:11 pr ntpd[5394]: precision = 1.000 usec
Mar 21 13:38:11 pr ntpd[5394]: kernel time sync status 0040
Mar 21 13:38:11 pr Linux Kernel Card Services
Mar 21 13:38:11 pr options:  [pci] [cardbus] [pm]
Mar 21 13:38:11 pr Intel ISA PCIC probe: not found.
Mar 21 13:38:11 pr rc-scripts: 'modprobe i82365' failed
Mar 21 13:38:11 pr rc-scripts: Trying alternative PCIC driver: yenta_socket
Mar 21 13:38:11 pr PCI: IRQ 10 for device 0000:01:09.0 doesn't match PIRQ mask - try pci=usepirqmask
Mar 21 13:38:11 pr PCI: Found IRQ 11 for device 0000:01:09.0
Mar 21 13:38:11 pr PCI: Sharing IRQ 11 with 0000:00:1d.1
Mar 21 13:38:11 pr IRQ routing conflict for 0000:01:09.0, have irq 10, want irq 11
Mar 21 13:38:11 pr Yenta: CardBus bridge found at 0000:01:09.0 [1025:1024]
Mar 21 13:38:11 pr Yenta: ISA IRQ mask 0x02b8, PCI irq 10
Mar 21 13:38:11 pr Socket status: 30000007
Mar 21 13:38:12 pr cardmgr[5444]: watching 1 socket
Mar 21 13:38:12 pr cs: IO port probe 0x0c00-0x0cff: clean.
Mar 21 13:38:12 pr cs: IO port probe 0x0800-0x08ff: clean.
Mar 21 13:38:12 pr cs: IO port probe 0x0100-0x04ff: excluding 0x380-0x38f 0x3c0-0x3df 0x4d0-0x4d7
Mar 21 13:38:12 pr cs: IO port probe 0x0a00-0x0aff: clean.
Mar 21 13:38:13 pr prelude-manager: - Subscribing TextMod to active reporting plugins.
Mar 21 13:38:13 pr prelude-manager: - Subscribing XmlMod to active reporting plugins.
Mar 21 13:38:13 pr prelude-manager: - sensors server started (listening on unix socket port 5554).
Mar 21 13:38:13 pr prelude-manager: - sensors server started (listening on unix socket port 5555).
Mar 21 13:38:13 pr prelude-manager: - administration server started (listening on 127.0.0.1:5555).
Mar 21 13:38:14 pr prelude-lml: - SimpleMod plugin added 224 rules.
Mar 21 13:38:14 pr prelude-lml: pconfig.c:set_file:131 : (errno=No such file or directory) : /var/log/auth.log does not exist or can't be read at program startup: check your configuration.
Mar 21 13:38:14 pr prelude-lml: error processing sensor options.
Mar 21 13:38:14 pr prelude-nids: - HttpMod subscribed for "http" protocol handling.
Mar 21 13:38:14 pr prelude-nids: - Done loading Unicode table (663 Unichars, 0 ignored, 0 with errors)
Mar 21 13:38:14 pr prelude-nids: - RpcMod subscribed for "rpc" protocol handling.
Mar 21 13:38:14 pr prelude-nids: - TelnetMod subscribed for "telnet" protocol handling.
Mar 21 13:38:14 pr prelude-nids: - ArpSpoof subscribed to : "[ARP]".
Mar 21 13:38:14 pr prelude-nids: - ScanDetect subscribed to : "[TCP,UDP]".
Mar 21 13:38:14 pr prelude-nids: /etc/prelude-nids/ruleset/web-misc.rules (81) Parse error: Unknow key rawbytes
Mar 21 13:38:14 pr prelude-nids: /etc/prelude-nids/ruleset/web-misc.rules (82) Parse error: Unknow key rawbytes
Mar 21 13:38:15 pr sshd[5633]: Server listening on :: port 22.
Mar 21 13:38:15 pr sshd[5633]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
Mar 21 13:38:15 pr prelude-nids: /etc/prelude-nids/ruleset/misc.rules (70) Parse error: Unknow reference 5807.
Mar 21 13:38:15 pr prelude-nids: - Signature engine added 1453 and ignored 3 signature.
Mar 21 13:38:15 pr prelude-nids: No Manager were configured. You need to setup a Manager for this Sensor to report events. Please use the "manager-addr" entry in the Sensor config file or the --manager-addr command line options.
Mar 21 13:38:15 pr cron[5714]: (CRON) STARTUP (fork ok)
Mar 21 13:38:20 pr xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/freefont (unreadable)
Mar 21 13:38:20 pr xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/sharefont (unreadable)
Mar 21 13:38:20 pr xfs: ignoring font path element /usr/share/fonts/default/Type1 (unreadable)
Mar 21 13:38:20 pr xfs: ignoring font path element /usr/share/fonts/ttf/decoratives (unreadable)
Mar 21 13:38:20 pr xfs: ignoring font path element /usr/share/fonts/ttf/western (unreadable)